CHARACTERISTIC | DESCRIPTION |
|---|
Air sampling rate | 2.2 liters/minute, typ. |
Chemical warfare agent detector2 | Identification of chemical warfare or toxic industrial gases using IMS technology. Several optional IMS approaches available. |
Toxic industrial chemical detector | IMS or 6-channel electrochemical gas detector array: large list of TIC options |
Combustible gases | Pellistor sensor, 0 to 100% Lower Explosive Limit range |
Bioaerosol detector2 | Detects sudden changes in biological aerosols. Detection limit is 10-25 bio-particles per liter of air at a 90% confidence level. |
Radiation detector | Sensitive gamma ray monitor employing both a CsI (Tl) scintillator and GM tube. Detection down to 0.01uSv/hr. Maximum level = 1.0 Sv/Hr. Gamma photon range is 0.05-3.0 MeV. |
Sensor data fusion | Embedded industrial process control computer collects and stores sensor data using ASAP Sentry™ software |
Digital communication | RS-232, Ethernet |
Body size | 35.8 cm W x 25.0 cm H x 17.2 cm D . |
Weight | Without battery: 7.9 kg With battery: 8.9 kg |
Operating temperature range | -30°C to 60°C |
Operating time | 8-24 hours on rechargeable battery; continuous operation if vehicle or mains power is available. |
Consumables | None, or replacement of IMS cartridge every 150-200 hours, depending on chemical warfare agent detector used. |
Wireless capability | Embedded wireless access point; TCP/IP protocol, 2.4 MHz ISM band with 2 km range. |
Location determination | GPS module |
