- PPE
ULTITEC 2000
Premium Oil, Liquid Splash & Infective Agents Resistant Protective Clothing
Designed to protect wearers against heavy liquid splash and biological hazards. The most popular and widely applied choice in various industries.
Features
An Effective Barrier Against Blood, Body Fluids and Infective Agents
The fabric performance exceeds both WHO protective clothing specification Option 1 & 2 for Ebola Virus Disease Infection Control. [Note*]
Proven protection against pesticides
Meets DIN 32781 requirement on pesticide penetration and comfort for agriculture application.
Breathable to Work Efficiently
Designed for comfort use. Allow wearers to work effeiciently while releasing their body heat to prevent heat exhausion.
Low linting
Reduces the risk of fiber contamination to the work environment.
Breathable to Work Efficiently
Designed for comfort use. Allow wearers to work efficiently while releasing their body heat to prevent heat exhaustion.
Targeted for ISO class 6 and above cleanroom with controlled environment.
Note*: The WHO recommended specification for coveralls against filovirus disease issued in Oct, 2014 stated that healthcare workers should choose appropriate protective apparel, which meets the following two requirements:option 1, tested for resistance to blood and body fluid penetration: meets or exceeds ISO 16603 class 3 exposure pressure.option 2, tested for resistance to blood-borne pathogen penetration; meets or exceeds ISO 16604 class 2 exposure pressure.Note**: ULTITEC 2000 coverall is suitable for both ISO 14644-1 and US FED-STD 209E cleanroom standard. Test result shown in the following table:
- TYPE 5 EN ISO 13982-1 Dry Particle Suits-Suits for protection against hazardous dusts and any dry particles.
- TYPE 6 EN 13034 reduced spray -suits which offer limited protection against a light spray of liquid chemicals.
- EN 14126 Protective clothing can resist against biological hazards and infective agents.
- EN 1073-2 Protective clothing against particulate radioactive contamination.
- EN 1149-5 Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5×10 exp 9 ohm.
- DIN 32781 Protective suits against pesticides.
Applications
Agriculture, Automotive, Biological Hazards, Disaster Management, Disease Control, Electronic Industries, Pharmaceutical, Petrochemical, Painting
Color
- White
Product Technology
Seam Construction
4-thread overlocked seam
- 7-9 stitched per inch
- Thread fibre is 150D
- Bite depth 4 mm
Fabric Construction
Microporous Film laminate PPSB
- MVTR is above 2500 gsm / 24hr (ASTM E96 BW)
- Hydro-head is above 2500 mm-H2O(EN 20811)
Performance Chart
| FABRIC PHYSICAL PROPERTIES | TEST METHOD | CLASS | |
|---|---|---|---|
| Abrasion Resistance | EN 530 | 1 | |
| Flex Cracking Resistance | EN ISO 7854-B | 5 | |
| Trapezoidal Tear Resistance | EN ISO 9073-4 | 1 | |
| Tensile Strength | EN ISO 13934-1 | 1 | |
| Puncture Resistance | EN 863 | 1 | |
| Seam Strength | EN ISO 13935-2 | 3 | |
| Antistaticity | EN 1149-5 | Pass | |
| pH Value | EN ISO 3071 | Pass | |
| Resistance to Ignition | EN 13274-4 | Pass | |
| Resistance to Water Penetration | EN 20811 | >2500 mm H2O |
| FABRIC COMFORT PROPERTIES | TEST METHOD | RESULT | |
|---|---|---|---|
| Moisture Vapor Transmission Rate | ASTM E96 B | 7,123 g/m²*24hr | |
| Water Vapour Resistance [Ret] | EN ISO 11092 | 31.7 m²*Pa/W |
| FABRIC CHEMICAL PROPERTIES | TEST METHOD | PENETRATION | REPELLENCY |
|---|---|---|---|
| Sulphuric acid 30% | EN ISO 6530 | Class 3 | Class 3 |
| Sodium Hydroxide 10% | EN ISO 6530 | Class 3 | Class 3 |
| o-Xylene | EN ISO 6530 | Class 2 | Class 1 |
| Butan-1-ol | EN ISO 6530 | Class 3 | Class 2 |
| Isopropanol* | EN ISO 6530 | 0.00% | 92.40% |
Note* Isopropanol test is not requested under EN 14325, therefore there is no classification
| AGAINST INFECTIVE AGENTS with EN 14126 | TEST METHOD | CLASS | |
|---|---|---|---|
| Resistance to penetration by blood / fluids | ISO 16603 | 6 | |
| Resistance to penetration by blood-borne pathogens | ISO 16604 | 2 | |
| Resistance to wet microbial penetration | ISO 22610 | 6 | |
| Resistance to liquid aerosol penetration | ISO/DIS 22611 | 3 | |
| Resistance to dry microbial penetration | ISO 22612 | 3 |
| Resistance to Penetration by Pesticides according to EN 14786 | Sample 1 | Sample 2 | Sample 3 | Sample 4 |
|---|---|---|---|---|
| Betanal Expert | N.D | N.D | N.D | N.D |
| Folicur | N.D | 0.22% | N.D | N.D |
| Amistar | N.D | N.D | N.D | N.D |
| Pinimor Granulat | N.D | N.D | N.D | N.D |
| U46-D-Fluid | N.D | N.D | N.D | N.D |
| WHOLE SUIT TEST PERFORMANCE | RESULT | |
|---|---|---|
| Type 5 | Inward Leakage Test | Pass |
| Type 6 | Low Level Spray Test | Pass |
| EN 1073-2 | Protective Clothing Against Radioactive Contamination | Class1 |
Coverall Size Chart
| SIZE | CHEST(CMS) | HEIGHT(CMS) |
|---|---|---|
| S | 84-92 | 162-170 |
| M | 92-100 | 170-176 |
| L | 100-108 | 176-182 |
| XL | 108-116 | 182-188 |
| 2XL | 116-124 | 188-194 |
| 3XL | 124-132 | 194-200 |
| 4XL | 132-140 | 200-206 |
