- PPE
ULTITEC 1800T
Oil & Saturated Splash Resistant Protective Clothing
Designed as a barrier to saturated liquid. It offers good protection and breathability with Type 4 certification.
Features
Proven protection of fabric performance against industrial chemicals
Act as a barrier against liquid penetration and repellency which meets EN 6530 standard..
Breathable & Comfortable
High water-vapour transmission rate results in good breathability and soft texture ensures wearer’s comfort.
Low Linting
Reduces risk of fibre contamination in workplace.
Sealed seam offers premium protection
Liquid-proof taped on seam to ensure wearer being protected with no seepage.
- TYPE 4 EN 14605 Spray Tight Suits- Suits which can protect against saturation of liquid chemical, where volume of the liquid builds up on the suit forming pools, resulting in rivulets.
- TYPE 5 EN ISO 13982-1 Dry Particle Suits-Suits for protection against hazardous dusts and any dry particles.
- TYPE 6 EN 13034 reduced spray -suits which offer limited protection against a light spray of liquid chemicals.
- EN 1149-5 Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5×10 exp 9 ohm.
- EN 1073-2 Protective clothing against particulate radioactive contamination.
- EN 14126 Protective clothing can resist against biological hazards and infective agents.
Applications
Agriculture, Automotive, Biological Hazards, Chemical Plants, Disaster Management, Petrochemical, Pharmaceutical, Painting
Color
- White/Blue
Product Technology
Seam Construction
4-thread overlocked seam with liquid-proof tape
- 7-9 stitches per inch
- Thread fibre is 150D
- Bite depth at 4mm
Fabric Construction
Microporous Film laminate PPSB
- Ret value at 9.3 m²*Pa/W
Performance Chart
| FABRIC PHYSICAL PROPERTIES | TEST METHOD | CLASS | |
|---|---|---|---|
| Abrasion Resistance | EN 530 | 1 | |
| Flex Cracking Resistance | EN ISO 7854-B | 3 | |
| Trapezoidal Tear Resistance | EN ISO 9073-4 | 2 | |
| Tensile Strength | EN ISO 13934-1 | 1 | |
| Puncture Resistance | EN 863 | 1 | |
| Seam Strength | EN ISO 13935-2 | 3 | |
| Antistaticity | EN 1149-5 | Pass | |
| pH Value | EN ISO 3071 | Pass | |
| Resistance to Ignition | EN 13274-4 | Pass |
| FABRIC COMFORT PROPERTIES | TEST METHOD | RESULT | |
|---|---|---|---|
| Moisture Vapor Transmission Rate | ASTM E96 B | 7,926 g/m²*24hr | |
| Water Vapour Resistance [Ret] | EN ISO 11092 | 9.3 m²*Pa/W |
| FABRIC CHEMICAL PROPERTIES | TEST METHOD | PENETRATION | REPELLENCY |
|---|---|---|---|
| Sulphuric acid 30% | EN 6530 | Class 3 | Class 3 |
| Sodium Hydroxide 10% | EN 6530 | Class 3 | Class 3 |
| AGAINST INFECTIVE AGENTS with EN 14126 | TEST METHOD | CLASS | |
|---|---|---|---|
| Resistance to penetration by blood / fluids | ISO 16603 | 6 | |
| Resistance to penetration by blood-borne pathogens | ISO 16604 | 1 | |
| Resistance to wet microbial penetration | ISO 22610 | 6 | |
| Resistance to liquid aerosol penetration | ISO/DIS 22611 | 3 | |
| Resistance to dry microbial penetration | ISO 22612 | 3 |
| WHOLE SUIT TEST PERFORMANCE | RESULT | |
|---|---|---|
| Type 4 | Spray Test | Pass |
| Type 5 | Inward Leakage Test | Pass |
| Type 6 | Low Level Spray Test | Pass |
| EN 1073-2 | Protective Clothing Against Radioactive Contamination | Class3 |
Coverall Size Chart
| SIZE | CHEST(CMS) | HEIGHT(CMS) |
|---|---|---|
| S | 84-92 | 162-170 |
| M | 92-100 | 170-176 |
| L | 100-108 | 176-182 |
| XL | 108-116 | 182-188 |
| 2XL | 116-124 | 188-194 |
| 3XL | 124-132 | 194-200 |
| 4XL | 132-140 | 200-206 |
PDF Download
